RICHI Teaches You: How To Make Wood Pellet Mill Last Longer
In recent years, the structure of the wood pellet mill has been constantly updated. However, no matter how the model is changed, the mold as the wearing part has to be constantly replaced. The expensive mold is also a major cost in the production process of wood pellets. Whether it is properly maintained or not directly affects the service life of the wood pellet machine mold, so it also directly affects the processing cost of wood pellets. So what are the ways to make the mold of the wood pellet mill last longer?
How to make the wood pellet mill last longer
(1) Regularly clean up the oil
Friends who have processed wood pellets all know that after every day of production, oil should be used to replace wood chips in the die holes. Liangyou Co., Ltd. reminds everyone that if the mold is not used for more than one month, it is recommended to take out the oil in the mold. Therefore, the oil will gradually harden during the long-term storage process, which will make it difficult to remove the next time it is used, which will seriously affect the subsequent use of the mold.
(2) It is not necessary to clean the mold for a long time
If the wood pellet mill machine mold and pressure roller will not be used for a long time, it is recommended to remove the mold and clean it before storing it. It mainly cleans the particles inside the mold and the sawdust attached to the surface of the mold. In this way, on the one hand, it prevents the particles from being hardened and difficult to remove due to long-term storage. On the other hand, since the sawdust has water absorption, if the sawdust on the surface is not removed, it may accelerate the corrosion of the electric wood pellet mill mold surface.
(3) The mold should be stored in a dry and ventilated place
Most of the molds of the hardwood pellet mill are made of alloy steel. If they are in a humid place for a long time, the surface of the mold may be damaged due to air corrosion, thus greatly reducing its service life.
(4) The handling process should be carefully
The mold of the industrial wood pellet mill is a high-precision part, and the mold hole is carefully machined according to the compression ratio of the mold. If you are careless during the handling process, the structure of the inner wall of the mold hole is damaged, which may lead to molding during processing. low rate and short service life.
(5) Filling with oil
After the daily granule processing, it is necessary to use oil to grind for a period of time to ensure that all the oil is left in the wood pellet mill die hole, which is of great benefit to the work the next day and is also conducive to the long-term use of the die. The oil can be mixed with waste oil and wood chips. It can be made once and can be recycled. (Related post: wood pellet mill for sale)
The above are the five tips in the use of the sawdust wood pellet machine. According to these five methods to maintain the biomass wood pellet mill mold, I believe that your mold can be used for a longer time. Richi Machinery will escort your healthy production at any time, consult WhatsApp: 8613838389622.
Bioeconomy is the future development field
Paying attention to the processing of wood pellets and the processing of biomass pellets is essentially to pay attention to the biomass energy economy, which is the future.
Bio-manufacturing technology empowers the bio-energy and bio-environmental protection industries, that is, the construction of renewable energy. Under the global carbon peaking and carbon neutrality goals, many countries have been developing towards a green and low-carbon future. The development of the biomass energy industry will largely solve the environmental problems caused by domestic waste, agricultural waste, and waste. At the same time, these wastes can be turned into treasures through scientific processes and converted into biomass energy.
At present, the scale of biomass industry in many countries in the world is still small. After years of development, there is no standard set of standards for biomass energy development and utilization. However, under the current foreseeable energy situation, it will bring endless opportunities and challenges to the future development of biomass energy.
The raw materials of biomass energy generally include crop straw, forestry waste, construction scraps, etc., which are solidified and extruded by cammercial wood pellet mill into high-density pellet fuel through pretreatment and processing. It can replace fossil fuels, improve energy conversion efficiency, and reduce harm to the environment and human beings.
Richi Machinery has introduced mature biomass wood pellet fuel solidification and wood pellet mill molding technology, and has taken the lead in developing a variety of high-quality renewable biomass energy wood pellet mill equipment in the industry. Interested customers are welcome to come and consult.